Alliance Roofing completed a commercial metal roof restoration project for Orr Hyundai using an acrylic coating system on a standing seam roof. This project was completed in Russellville, AR and reflects the same restoration standards and workmanship we provide for properties in Texarkana, TX and surrounding markets.
Orr Hyundai Commercial Roofing Project Snapshot
- Job Type: Commercial
- Roof System: Metal restoration with acrylic coatings
- Roof Type: Standing seam metal roof
- Square Feet: 13,500 sq ft
- Job Location: Russellville, AR
- Completed: September 2025
Commercial Standing Seam Metal Roof Restoration in Texarkana, TX
For many aging standing seam systems, an acrylic restoration can improve waterproofing and extend service life when detail prep is done correctly. On this project, our team focused heavily on fasteners, seams, penetrations, and standing seam laps before applying the coating system.
- Pressure washed the roof for proper surface preparation
- Caulked all fasteners to address common leak points
- Embedded reinforcing fabric on all seams and around penetrations
- Caulked standing seam laps for additional weather protection
- Applied acrylic coating system as the final restoration layer
Scope of Work
- Initial roof inspection and restoration planning
- Pressure washing and substrate preparation
- Fastener-by-fastener caulking pass
- Fabric reinforcement at seams and penetrations
- Lap detailing on standing seam components
- Acrylic coating installation and final quality review
Before Photos
Team at Work
After Photos
Related Commercial Roofing Services
- Commercial Roofing Services
- Commercial Metal Roofing Services
- Commercial Roof Coatings
- Service Areas
Need a Standing Seam Metal Roof Restoration Contractor in Texarkana, TX?
If your standing seam commercial roof needs restoration, Alliance Roofing can inspect your system and recommend a durable coating approach for long-term performance.
FAQ: Standing Seam Metal Roof Restoration
Why is fastener caulking important on standing seam roofs?
Fasteners are common water-entry points over time. Properly sealing them is a key step in reducing leak risk before coating application.
Why reinforce seams and penetrations with fabric?
Fabric reinforcement adds strength at movement-prone areas like seams and penetrations, improving long-term performance of the restoration system.
Is acrylic coating a good option for commercial metal roofs near Texarkana, TX?
For many metal roofs in the region, acrylic restoration systems can provide reliable protection and lifecycle extension when surface prep and detailing are done correctly.